skogai home network

Captured 2026-10-19 from the TP-Link Archer MR200 admin UI · raw data: network.json

Topology

  Internet (Telenor 4G LTE)
        │
  ┌─────┴──────────────────────────┐
  │ TP-Link Archer MR200  10.10.4.1 │  Wi-Fi: 2.4 GHz "skogai" + 5 GHz (0 clients)
  └─────┬──────────────────┬───────┘
        │ LAN (wired)       │
  skogix-workstation    pfSense
  10.10.4.3             10.10.4.2 ──► own downstream network
                                       (not visible from the MR200)

Wired clients

Name	IP	MAC
skogix-workstation	`10.10.4.3`	`60-45-CB-A9-11-91`
pfSense	`10.10.4.2`	`FC-22-F4-78-7B-D3`

pfSense dropped off the list once during the check (count went 2 → 1 → 2), then came back.

Router

Model	TP-Link Archer MR200 (4G LTE router)
Hardware	Archer MR200 v7.0 00000001
Firmware	`1.2.0 0.9.1 v0001.0 Build 250907 Rel.72360n`
LAN IP / admin	`https://10.10.4.1/`
LAN subnet	`10.10.4.0/24` (inferred from addresses)
Wireless	2.4 GHz SSID `skogai`, 5 GHz enabled · 0 wireless clients
Mesh devices	0

Internet / WAN

Interface	LTE · Connected
ISP / network	Telenor · 4G LTE · signal 100% · SIM ready
WAN IPv4	`1xx.x.62.52` (partly hidden in capture, check router)
WAN IPv6	`2a02:1406:125:107a:…` (verify)
DNS	`62.127.97.32`, `62.127.97.33` `2a02:1400:15:100::1`, `2a02:1400:15:101::1`
Data used (total)	561.768 GB at capture

Notes

pfSense sits as a client on the MR200 LAN, so anything behind it is double-NATed and won't show in the MR200 client list.
Consider DHCP reservations on the MR200 for 10.10.4.2 and 10.10.4.3 so these addresses stay fixed.
The router IMEI is shown in the admin footer and is left out of this page on purpose.